---

Symbols, numbers A B C D E F G H I J K L M N O P Q R S T U V W X

---

• IBM, external floppy, support
• IBM437 character set, ``Creating a character mapping table'', ``Creating a character mapping table''
• icons
  • dragging and dropping
  • types
  • using
• iconv(C)
• IDE
  • drives and controllers, ``Configuring IDE disks and disk controllers'', ``Supported hard disk configurations''
  • restoring BIOS information
  • root disk
  • specifying devices
• idmkenv(ADM)
• ID number, SCSI tape drive, ``Problems with SCSI tape drives'', ``Problems with SCSI tape drives''
• initialization letters
• init(M)
  • boot problems, ``Cannot open /etc/inittab'', ``System hangs at boot time''
  • INIT: Cannot open /etc/inittab
  • INIT: SINGLE USER MODE
• INITSH: /etc/bcheckrc not found
• inittab. See /etc/inittab
• installation
  • adding hard disks, ``Adding secondary hard disks'', ``Installing a hard disk'', ``BIOS support for disks larger than 1024 cylinders''
  • bitpads
  • bus cards, ``Adding and configuring serial cards'', ``Adding and configuring parallel ports'', ``About serial ports'', ``Installing bus cards''
  • cable connections
  • CD-ROM drives
  • COM ports
  • configuring devices during
  • emergency boot floppy disk set
  • floptical drives
  • LS-120 drives
  • memory
  • modems, ``Installing serial terminals'', ``Smartmodem 2400, V-series 9600 or compatible'', ``Adding modems''
  • monochrome cards
  • mouse, ``Configuring a mouse'', ``Configuring a mouse'', ``Configuring a mouse'', ``Configuring a mouse'', ``Adding mice and bitpads''
  • multiport cards, ``Adding and configuring serial cards'', ``About serial ports'', ``Adding and configuring serial cards''
  • Netscape Web server
  • on EISA systems
  • over the network, ``Installing software'', ``Installing software''
  • planning system
  • Plug and Play devices
  • printers
  • SCSI floppy drives
  • software, ``Installing software'', ``Loading software''
  • tape drives
  • terminals
• installed software
  • listing
  • viewing
• installpkg(ADM), installing BTLDs
• instbb(ADM)
• intelligent serial adapter
• intent logging
• interleave for hard disks
• internal memory, adding
• internal modems, ``Choosing a serial port to use'', ``Guidelines for non-supported modems''
• internal system codeset, ``Setting the internal system codeset'', ``Device mapping''
• International Settings Manager
• Internet
  • See also Internet Manager
  • interface, locking and unlocking
  • modem connection
  • PPP connection
  • services
    • configuring, ``Configuring Internet Services'', ``Configuring Internet Services''
    • main menu
    • network adapters
• Internet browsers
• Internet Manager
  • passwords, ``Web'', ``Security''
  • remote access and security
  • security
  • starting
    • remotely
• Internet Service Provider
• interrupt key, ``The keyboard'', ``The keyboard''
• interrupt trigger level, changing
• interrupt vectors
  • boot display
  • COM ports, ``Adding and configuring serial cards'', ``About serial ports'', ``About serial ports'', ``Testing your modem connection''
  • conflicts
    • PCI/ISA bus machines
    • tape drives, ``Problems with QIC-02 cartridge tape drives'', ``Problems with QIC-02 cartridge tape drives'', ``Problems with QIC-02 cartridge tape drives''
  • mouse
  • parallel ports
  • printers
  • tape drives
  • typical settings
• INT signal
• invoking programs, users
• IP address, server, Netscape default
• IPCCT_pipe
• IPCST_pipe|
• ir: ERROR: Tape controller ... not found, message
• IRQ (physical interrupt). See interrupt vectors
• Irwin
  • mcconfig
  • mcdaemon
  • tape drive
    • backups
• ISA PnP Configuration Manager
• ISO8859-15 character set
• ISO8859-1 character set, ``About locales'', ``Setting the internal system codeset'', ``Creating a character mapping table'', ``Creating a character mapping table'', ``About locales''
• ISO8859-1 character set
• ISO-9660, CD-ROM format
• ISP

---

Symbols, numbers A B C D E F G H I J K L M N O P Q R S T U V W X

---