|
|
Table of Contents
Network administrators are often concerned about the availability of file and print services. Network users are inclined toward intolerance of the services they depend on to perform vital task responsibilities.
A sign in a computer room served to remind staff of their responsibilities. It read:
All humans fail, in both great and small ways we fail continually. Machines fail too. Computers are machines that are managed by humans, the fallout from failure can be spectacular. Your responsibility is to deal with failure, to anticipate it and to eliminate it as far as is humanly and economically wise to achieve. Are your actions part of the problem or part of the solution?
If we are to deal with failure in a planned and productive manner, then first we must understand the problem. That is the purpose of this chapter.
Parenthetically, in the following discussion there are seeds of information on how to provision a network infrastructure against failure. Our purpose here is not to provide a lengthy dissertation on the subject of high availability. Additionally, we have made a conscious decision to not provide detailed working examples of high availability solutions; instead we present an overview of the issues in the hope that someone will rise to the challenge of providing a detailed document that is focused purely on presentation of the current state of knowledge and practice in high availability as it applies to the deployment of Samba and other CIFS/SMB technologies.
The following summary was part of a presentation by Jeremy Allison at the SambaXP 2003 conference that was held at Goettingen, Germany, in April 2003. Material has been added from other sources, but it was Jeremy who inspired the structure that follows.
All clustering technologies aim to achieve one or more of the following:
Obtain the maximum affordable computational power.
Obtain faster program execution.
Deliver unstoppable services.
Avert points of failure.
Exact most effective utilization of resources.
A clustered file server ideally has the following properties:
All clients can connect transparently to any server.
A server can fail and clients are transparently reconnected to another server.
All servers serve out the same set of files.
All file changes are immediately seen on all servers.
Requires a distributed file system.
Infinite ability to scale by adding more servers or disks.
In short, the problem is one of state.
All TCP/IP connections are dependent on state information.
The TCP connection involves a packet sequence number. This sequence number would need to be dynamically updated on all machines in the cluster to effect seamless TCP failover.
CIFS/SMB (the Windows networking protocols) uses TCP connections.
This means that from a basic design perspective, failover is not seriously considered.
Servers keep state information about client connections.
CIFS/SMB involves a lot of state.
Every file open must be compared with other open files to check share modes.
To make it possible for a cluster of file servers to appear as a single server that has one name and one IP address, the incoming TCP data streams from clients must be processed by the front-end virtual server. This server must de-multiplex the incoming packets at the SMB protocol layer level and then feed the SMB packet to different servers in the cluster.
One could split all IPC$ connections and RPC calls to one server to handle printing and user lookup requirements. RPC printing handles are shared between different IPC4 sessions it is hard to split this across clustered servers!
Conceptually speaking, all other servers would then provide only file services. This is a simpler problem to concentrate on.
De-multiplexing of SMB requests requires knowledge of SMB state information, all of which must be held by the front-end virtual server. This is a perplexing and complicated problem to solve.
Windows XP and later have changed semantics so state information (vuid, tid, fid) must match for a successful operation. This makes things simpler than before and is a positive step forward.
SMB requests are sent by vuid to their associated server. No code exists today to effect this solution. This problem is conceptually similar to the problem of correctly handling requests from multiple requests from Windows 2000 Terminal Server in Samba.
One possibility is to start by exposing the server pool to clients directly. This could eliminate the de-multiplexing step.
There exists many distributed file systems for UNIX and Linux.
Many could be adopted to backend our cluster, so long as awareness of SMB semantics is kept in mind (share modes, locking, and oplock issues in particular). Common free distributed file systems include:
NFS
AFS
OpenGFS
Lustre
The server pool (cluster) can use any distributed file system backend if all SMB semantics are performed within this pool.
Where a clustered server provides purely SMB services, oplock handling may be done within the server pool without imposing a need for this to be passed to the backend file system pool.
On the other hand, where the server pool also provides NFS or other file services, it will be essential that the implementation be oplock-aware so it can interoperate with SMB services. This is a significant challenge today. A failure to provide this interoperability will result in a significant loss of performance that will be sorely noted by users of Microsoft Windows clients.
Last, all state information must be shared across the server pool.
Most backend file systems support POSIX file semantics. This makes it difficult to push SMB semantics back into the file system. POSIX locks have different properties and semantics from SMB locks.
All smbd processes in the server pool must of necessity communicate
very quickly. For this, the current tdb file structure that Samba
uses is not suitable for use across a network. Clustered smbds must use something else.
High-speed interserver communications in the server pool is a design prerequisite for a fully functional system. Possibilities for this include:
Proprietary shared memory bus (example: Myrinet or SCI [scalable coherent interface]). These are high-cost items.
Gigabit Ethernet (now quite affordable).
Raw Ethernet framing (to bypass TCP and UDP overheads).
We have yet to identify metrics for performance demands to enable this to happen effectively.
Samba needs to be significantly modified to work with a high-speed server interconnect system to permit transparent failover clustering.
Particular functions inside Samba that will be affected include:
The locking database, oplock notifications, and the share mode database.
Failure semantics need to be defined. Samba behaves the same way as Windows. When oplock messages fail, a file open request is allowed, but this is potentially dangerous in a clustered environment. So how should interserver pool failure semantics function, and how should such functionality be implemented?
Should this be implemented using a point-to-point lock manager, or can this be done using multicast techniques?
Allowing failover servers to handle different functions within the exported file system removes the problem of requiring a distributed locking protocol.
If only one server is active in a pair, the need for high-speed server interconnect is avoided. This allows the use of existing high-availability solutions, instead of inventing a new one. This simpler solution comes at a price the cost of which is the need to manage a more complex file name space. Since there is now not a single file system, administrators must remember where all services are located a complexity not easily dealt with.
The virtual server is still needed to redirect requests to backend servers. Backend file space integrity is the responsibility of the administrator.
Failover servers must communicate in order to handle resource failover. This is essential for high-availability services. The use of a dedicated heartbeat is a common technique to introduce some intelligence into the failover process. This is often done over a dedicated link (LAN or serial).
Many failover solutions (like Red Hat Cluster Manager and Microsoft Wolfpack) can use a shared SCSI of Fiber Channel disk storage array for failover communication. Information regarding Red Hat high availability solutions for Samba may be obtained from www.redhat.com.
The Linux High Availability project is a resource worthy of consultation if your desire is to build a highly available Samba file server solution. Please consult the home page at www.linux-ha.org/.
Front-end server complexity remains a challenge for high availability because it must deal gracefully with backend failures, while at the same time providing continuity of service to all network clients.
MS-DFS links can be used to redirect clients to disparate backend servers. This pushes complexity back to the network client, something already included by Microsoft. MS-DFS creates the illusion of a simple, continuous file system name space that works even at the file level.
Above all, at the cost of complexity of management, a distributed system (pseudo-cluster) can be created using existing Samba functionality.