Supported network adapters
This section contains two lists of
network adapters supported by
SCO OpenServer:
In addition, this section describes
known issues using network adapters with SCO OpenServer.
Configuration for most SCO network drivers is simple;
you need only enter a few
driver configuration parameters.
In some cases, the drivers can read configuration parameters
directly from the hardware.
You might require additional information to configure
some drivers; see the adapter-specific information
provided as context-sensitive help
from the
Network Configuration Manager.
NOTE:
Device drivers for listed chip sets are certified to
manufacturers' reference circuitry. However, SCO drivers are
not tested on all hardware platforms and may not
work for supported chip sets in some hardware implementations.
If you experience problems with a particular chip set, contact
Technical Support
or your SCO OpenServer distributor for more information.
Next topic:
Supported network adapters by manufacturer
© 2003 Caldera International, Inc. All rights reserved.
SCO OpenServer Release 5.0.7 -- 11 February 2003