|
|
perluts - Perl under UTS
This document can be read as is: as README.uts, or you can read it after you build your package using ``man perluts''.
The purpose is to help you build Perl for UTS, which, if you follow these instructions, should be easy, and result in a solidly working installation.
Perl 5.7.2 (Developmental) or Perl 5.8.x (forthcoming) for UTS
NOTE: Some sites have redefined the way uname works, and if yours does this, special steps must be taken so that Configure can recognize your system as a UTS system. To see if you are in this category, issue the command ``uname -a''. It should look something like:
uts juno 4 4.4 9672 370
At any rate, the first field should be ``uts''. If this is not the case; supposing it is, say telcoUTS, create a script, uts/uname (i.e. uname, in the subdirectory ``uts'' of the main Perl source dir): # uname /usr/bin/uname ``$@'' | sed -e 's/^telcoUTS/uts/'
and when you execute Configure, do it as below, except for adding PATH=uts:$PATH as a prefix. I.e. do:
PATH=uts:$PATH ./Configure ...
There is no need to do an interactive configure, just type
./Configure -de [-Dusedevel] [-Doptimize=-g ] 2>&1 | tee Conf.out
``-Dusedevel'' may be required to configure Perl 5.7.2 non-interactively. Use -Doptimize=-g if you want to run Perl under sdb or gdb, OR if you want to be able to use the -D command line flags to perl, which are occasionally useful in debugging perl scripts.
In this and the following steps, the ``2>&1 | tee XXX.out'' records all output from the process, which will be useful if anything unexpected goes wrong.
Then do the compilation with
make 2>&1 | tee make.out
Finally, test using
make test 2>&1 | tee make-test.out
In the output, the only failures you should see should look like:
lib/Math/BigInt/t/bigfltpm.........Use of uninitialized value ...
FAILED at test 57
lib/Math/BigInt/t/bigintc..........ok
lib/Math/BigInt/t/bigintpm.........FAILED at test 204
lib/Math/BigInt/t/mbimbf...........Use of uninitialized value ...
Illegal division by zero at ../lib/Math/BigInt/Calc.pm line 314.
FAILED at test 71
lib/Math/Complex...................exp: OVERFLOW
FAILED at test 250
lib/Math/Trig......................exp: OVERFLOW
ok
lib/Memoize/t/array................ok
...
lib/Net/protoent...................ok
lib/Net/servent....................FAILED at test 0
This means that everything passes except for some problems in the packages ``Math::BigInt'', ``Math::Complex'', and ``Math::Trig''. The lib/Net/servent failure seems to be a bug in the test program. To confirm this, from the main Perl source dir, do:
LD_LIBRARY_PATH=`pwd` ./perl -Ilib lib/Net/servent.t
and it should output
1..3 ok 1 ok 2 ok 3
Run the command ``make install''
Hal Morris UTS Global LLC email: hom00@utsglobal.com