|
|
Unicode::Collate - Unicode Collation Algorithm
use Unicode::Collate;
#construct $Collator = Unicode::Collate->new(%tailoring);
#sort @sorted = $Collator->sort(@not_sorted);
#compare $result = $Collator->cmp($a, $b); # returns 1, 0, or -1.
# If %tailoring is false (i.e. empty), # $Collator should do the default collation.
This module is an implementation of Unicode Technical Standard #10 (a.k.a. UTS #10) - Unicode Collation Algorithm (a.k.a. UCA).
The new method returns a collator object.
$Collator = Unicode::Collate->new(
UCA_Version => $UCA_Version,
alternate => $alternate, # deprecated: use of 'variable' is recommended.
backwards => $levelNumber, # or \@levelNumbers
entry => $element,
hangul_terminator => $term_primary_weight,
ignoreName => qr/$ignoreName/,
ignoreChar => qr/$ignoreChar/,
katakana_before_hiragana => $bool,
level => $collationLevel,
normalization => $normalization_form,
overrideCJK => \&overrideCJK,
overrideHangul => \&overrideHangul,
preprocess => \&preprocess,
rearrange => \@charList,
table => $filename,
undefName => qr/$undefName/,
undefChar => qr/$undefChar/,
upper_before_lower => $bool,
variable => $variable,
);
If the tracking version number of UCA is given,
behavior of that tracking version is emulated on collating.
If omitted, the return value of UCA_Version() is used.
UCA_Version() should return the latest tracking version supported.
The supported tracking version: 8, 9, 11, or 14.
UCA Unicode Standard DUCET (@version)
---------------------------------------------------
8 3.1 3.0.1 (3.0.1d9)
9 3.1 with Corrigendum 3 3.1.1 (3.1.1)
11 4.0 4.0.0 (4.0.0)
14 4.1.0 4.1.0 (4.1.0)
Note: Recent UTS #10 renames ``Tracking Version'' to ``Revision.''
-- see 3.2.2 Alternate Weighting, version 8 of UTS #10
For backward compatibility, alternate (old name) can be used
as an alias for variable.
-- see 3.1.2 French Accents, UTS #10.
backwards => $levelNumber or \@levelNumbers
Weights in reverse order; ex. level 2 (diacritic ordering) in French. If omitted, forwards at all the levels.
-- see 3.1 Linguistic Features; 3.2.1 File Format, UTS #10.
If the same character (or a sequence of characters) exists
in the collation element table through table,
mapping to collation elements is overrided.
If it does not exist, the mapping is defined additionally.
entry => <<'ENTRY', # for DUCET v4.0.0 (allkeys-4.0.0.txt)
0063 0068 ; [.0E6A.0020.0002.0063] # ch
0043 0068 ; [.0E6A.0020.0007.0043] # Ch
0043 0048 ; [.0E6A.0020.0008.0043] # CH
006C 006C ; [.0F4C.0020.0002.006C] # ll
004C 006C ; [.0F4C.0020.0007.004C] # Ll
004C 004C ; [.0F4C.0020.0008.004C] # LL
00F1 ; [.0F7B.0020.0002.00F1] # n-tilde
006E 0303 ; [.0F7B.0020.0002.00F1] # n-tilde
00D1 ; [.0F7B.0020.0008.00D1] # N-tilde
004E 0303 ; [.0F7B.0020.0008.00D1] # N-tilde
ENTRY
entry => <<'ENTRY', # for DUCET v4.0.0 (allkeys-4.0.0.txt)
00E6 ; [.0E33.0020.0002.00E6][.0E8B.0020.0002.00E6] # ae ligature as <a><e>
00C6 ; [.0E33.0020.0008.00C6][.0E8B.0020.0008.00C6] # AE ligature as <A><E>
ENTRY
NOTE: The code point in the UCA file format (before ';')
must be a Unicode code point (defined as hexadecimal),
but not a native code point.
So 0063 must always denote U+0063,
but not a character of "\x63".
Weighting may vary depending on collation element table.
So ensure the weights defined in entry will be consistent with
those in the collation element table loaded via table.
In DUCET v4.0.0, primary weight of C is 0E60
and that of D is 0E6D. So setting primary weight of CH to 0E6A
(as a value between 0E60 and 0E6D)
makes ordering as C < CH < D.
Exactly speaking DUCET already has some characters between C and D:
small capital C (U+1D04) with primary weight 0E64,
c-hook/C-hook (U+0188/U+0187) with 0E65,
and c-curl (U+0255) with 0E69.
Then primary weight 0E6A for CH makes CH
ordered between c-curl and D.
-- see 7.1.4 Trailing Weights, UTS #10.
If a true value is given (non-zero but should be positive),
it will be added as a terminator primary weight to the end of
every standard Hangul syllable. Secondary and any higher weights
for terminator are set to zero.
If the value is false or hangul_terminator key does not exist,
insertion of terminator weights will not be performed.
Boundaries of Hangul syllables are determined according to conjoining Jamo behavior in the Unicode Standard and HangulSyllableType.txt.
Implementation Note: (1) For expansion mapping (Unicode character mapped to a sequence of collation elements), a terminator will not be added between collation elements, even if Hangul syllable boundary exists there. Addition of terminator is restricted to the next position to the last collation element.
(2) Non-conjoining Hangul letters (Compatibility Jamo, halfwidth Jamo, and enclosed letters) are not automatically terminated with a terminator primary weight. These characters may need terminator included in a collation element table beforehand.
-- see 3.2.2 Variable Weighting, UTS #10.
Makes the entry in the table completely ignorable; i.e. as if the weights were zero at all level.
Through ignoreChar, any character matching qr/$ignoreChar/
will be ignored. Through ignoreName, any character whose name
(given in the table file as a comment) matches qr/$ignoreName/
will be ignored.
E.g. when 'a' and 'e' are ignorable, 'element' is equal to 'lament' (or 'lmnt').
-- see 7.3.1 Tertiary Weight Table, UTS #10.
By default, hiragana is before katakana. If the parameter is made true, this is reversed.
NOTE: This parameter simplemindedly assumes that any hiragana/katakana distinctions must occur in level 3, and their weights at level 3 must be same as those mentioned in 7.3.1, UTS #10. If you define your collation elements which violate this requirement, this parameter does not work validly.
-- see 4.3 Form Sort Key, UTS #10.
Set the maximum level. Any higher levels than the specified one are ignored.
Level 1: alphabetic ordering Level 2: diacritic ordering Level 3: case ordering Level 4: tie-breaking (e.g. in the case when variable is 'shifted')
ex.level => 2,
If omitted, the maximum is the 4th.
-- see 4.1 Normalize, UTS #10.
If specified, strings are normalized before preparation of sort keys (the normalization is executed after preprocess).
A form name Unicode::Normalize::normalize() accepts will be applied
as $normalization_form.
Acceptable names include 'NFD', 'NFC', 'NFKD', and 'NFKC'.
See Unicode::Normalize::normalize() for detail.
If omitted, 'NFD' is used.
normalization is performed after preprocess (if defined).
Furthermore, special values, undef and "prenormalized", can be used,
though they are not concerned with Unicode::Normalize::normalize().
If undef (not a string "undef") is passed explicitly
as the value for this key,
any normalization is not carried out (this may make tailoring easier
if any normalization is not desired). Under (normalization => undef),
only contiguous contractions are resolved;
e.g. even if A-ring (and A-ring-cedilla) is ordered after Z,
A-cedilla-ring would be primary equal to A.
In this point,
(normalization => undef, preprocess => sub { NFD(shift) })
is not equivalent to (normalization => 'NFD').
In the case of (normalization => "prenormalized"),
any normalization is not performed, but
non-contiguous contractions with combining characters are performed.
Therefore
(normalization => 'prenormalized', preprocess => sub { NFD(shift) })
is equivalent to (normalization => 'NFD').
If source strings are finely prenormalized,
(normalization => 'prenormalized') may save time for normalization.
Except (normalization => undef),
Unicode::Normalize is required (see also CAVEAT).
-- see 7.1 Derived Collation Elements, UTS #10.
By default, CJK Unified Ideographs are ordered in Unicode codepoint order
but CJK Unified Ideographs (if UCA_Version is 8 to 11, its range is
U+4E00..U+9FA5; if UCA_Version is 14, its range is U+4E00..U+9FBB)
are lesser than CJK Unified Ideographs Extension (its range is
U+3400..U+4DB5 and U+20000..U+2A6D6).
Through overrideCJK, ordering of CJK Unified Ideographs can be overrided.
ex. CJK Unified Ideographs in the JIS code point order.
overrideCJK => sub {
my $u = shift; # get a Unicode codepoint
my $b = pack('n', $u); # to UTF-16BE
my $s = your_unicode_to_sjis_converter($b); # convert
my $n = unpack('n', $s); # convert sjis to short
[ $n, 0x20, 0x2, $u ]; # return the collation element
},
ex. ignores all CJK Unified Ideographs.
overrideCJK => sub {()}, # CODEREF returning empty list
# where ->eq("Pe\x{4E00}rl", "Perl") is true
# as U+4E00 is a CJK Unified Ideograph and to be ignorable.
If undef is passed explicitly as the value for this key,
weights for CJK Unified Ideographs are treated as undefined.
But assignment of weight for CJK Unified Ideographs
in table or entry is still valid.
-- see 7.1 Derived Collation Elements, UTS #10.
By default, Hangul Syllables are decomposed into Hangul Jamo,
even if (normalization => undef).
But the mapping of Hangul Syllables may be overrided.
This parameter works like overrideCJK, so see there for examples.
If you want to override the mapping of Hangul Syllables, NFD, NFKD, and FCD are not appropriate, since they will decompose Hangul Syllables before overriding.
If undef is passed explicitly as the value for this key,
weight for Hangul Syllables is treated as undefined
without decomposition into Hangul Jamo.
But definition of weight for Hangul Syllables
in table or entry is still valid.
-- see 5.1 Preprocessing, UTS #10.
If specified, the coderef is used to preprocess before the formation of sort keys.
ex. dropping English articles, such as ``a'' or ``the''. Then, ``the pen'' is before ``a pencil''.
preprocess => sub {
my $str = shift;
$str =~ s/\b(?:an?|the)\s+//gi;
return $str;
},
preprocess is performed before normalization (if defined).
-- see 3.1.3 Rearrangement, UTS #10.
Characters that are not coded in logical order and to be rearranged.
If UCA_Version is equal to or lesser than 11, default is:
rearrange => [ 0x0E40..0x0E44, 0x0EC0..0x0EC4 ],
If you want to disallow any rearrangement, pass undef or []
(a reference to empty list) as the value for this key.
If UCA_Version is equal to 14, default is [] (i.e. no rearrangement).
According to the version 9 of UCA, this parameter shall not be used; but it is not warned at present.
-- see 3.2 Default Unicode Collation Element Table, UTS #10.
You can use another collation element table if desired.
The table file should locate in the Unicode/Collate directory
on @INC. Say, if the filename is Foo.txt,
the table file is searched as Unicode/Collate/Foo.txt in @INC.
By default, allkeys.txt (as the filename of DUCET) is used. If you will prepare your own table file, any name other than allkeys.txt may be better to avoid namespace conflict.
If undef is passed explicitly as the value for this key,
no file is read (but you can define collation elements via entry).
A typical way to define a collation element table without any file of table:
$onlyABC = Unicode::Collate->new(
table => undef,
entry => << 'ENTRIES',
0061 ; [.0101.0020.0002.0061] # LATIN SMALL LETTER A
0041 ; [.0101.0020.0008.0041] # LATIN CAPITAL LETTER A
0062 ; [.0102.0020.0002.0062] # LATIN SMALL LETTER B
0042 ; [.0102.0020.0008.0042] # LATIN CAPITAL LETTER B
0063 ; [.0103.0020.0002.0063] # LATIN SMALL LETTER C
0043 ; [.0103.0020.0008.0043] # LATIN CAPITAL LETTER C
ENTRIES
);
If ignoreName or undefName is used, character names should be
specified as a comment (following #) on each line.
-- see 6.3.4 Reducing the Repertoire, UTS #10.
Undefines the collation element as if it were unassigned in the table. This reduces the size of the table. If an unassigned character appears in the string to be collated, the sort key is made from its codepoint as a single-character collation element, as it is greater than any other assigned collation elements (in the codepoint order among the unassigned characters). But, it'd be better to ignore characters unfamiliar to you and maybe never used.
Through undefChar, any character matching qr/$undefChar/
will be undefined. Through undefName, any character whose name
(given in the table file as a comment) matches qr/$undefName/
will be undefined.
ex. Collation weights for beyond-BMP characters are not stored in object:
undefChar => qr/[^\0-\x{fffd}]/,
-- see 6.6 Case Comparisons, UTS #10.
By default, lowercase is before uppercase. If the parameter is made true, this is reversed.
NOTE: This parameter simplemindedly assumes that any lowercase/uppercase distinctions must occur in level 3, and their weights at level 3 must be same as those mentioned in 7.3.1, UTS #10. If you define your collation elements which differs from this requirement, this parameter doesn't work validly.
-- see 3.2.2 Variable Weighting, UTS #10.
This key allows to variable weighting for variable collation elements, which are marked with an ASTERISK in the table (NOTE: Many punction marks and symbols are variable in allkeys.txt).
variable => 'blanked', 'non-ignorable', 'shifted', or 'shift-trimmed'.
These names are case-insensitive. By default (if specification is omitted), 'shifted' is adopted.
'Blanked' Variable elements are made ignorable at levels 1 through 3;
considered at the 4th level.
'Non-Ignorable' Variable elements are not reset to ignorable.
'Shifted' Variable elements are made ignorable at levels 1 through 3
their level 4 weight is replaced by the old level 1 weight.
Level 4 weight for Non-Variable elements is 0xFFFF.
'Shift-Trimmed' Same as 'shifted', but all FFFF's at the 4th level
are trimmed.
@sorted = $Collator->sort(@not_sorted)
Sorts a list of strings.
$result = $Collator->cmp($a, $b)
Returns 1 (when $a is greater than $b)
or 0 (when $a is equal to $b)
or -1 (when $a is lesser than $b).
$result = $Collator->eq($a, $b)
$result = $Collator->ne($a, $b)
$result = $Collator->lt($a, $b)
$result = $Collator->le($a, $b)
$result = $Collator->gt($a, $b)
$result = $Collator->ge($a, $b)
They works like the same name operators as theirs.
eq : whether $a is equal to $b. ne : whether $a is not equal to $b. lt : whether $a is lesser than $b. le : whether $a is lesser than $b or equal to $b. gt : whether $a is greater than $b. ge : whether $a is greater than $b or equal to $b.
$sortKey = $Collator->getSortKey($string)
-- see 4.3 Form Sort Key, UTS #10.
Returns a sort key.
You compare the sort keys using a binary comparison and get the result of the comparison of the strings using UCA.
$Collator->getSortKey($a) cmp $Collator->getSortKey($b)
is equivalent to
$Collator->cmp($a, $b)
$sortKeyForm = $Collator->viewSortKey($string)
Converts a sorting key into its representation form.
If UCA_Version is 8, the output is slightly different.
use Unicode::Collate;
my $c = Unicode::Collate->new();
print $c->viewSortKey("Perl"),"\n";
# output: # [0B67 0A65 0B7F 0B03 | 0020 0020 0020 0020 | 0008 0002 0002 0002 | FFFF FFFF FFFF FFFF] # Level 1 Level 2 Level 3 Level 4
DISCLAIMER: If preprocess or normalization parameter is true
for $Collator, calling these methods (index, match, gmatch,
subst, gsubst) is croaked,
as the position and the length might differ
from those on the specified string.
(And rearrange and hangul_terminator parameters are neglected.)
The match, gmatch, subst, gsubst methods work
like m//, m//g, s///, s///g, respectively,
but they are not aware of any pattern, but only a literal substring.
$position = $Collator->index($string, $substring[, $position])
($position, $length) = $Collator->index($string, $substring[, $position])
If $substring matches a part of $string, returns
the position of the first occurrence of the matching part in scalar context;
in list context, returns a two-element list of
the position and the length of the matching part.
If $substring does not match any part of $string,
returns -1 in scalar context and
an empty list in list context.
e.g. you say
my $Collator = Unicode::Collate->new( normalization => undef, level => 1 );
# (normalization => undef) is REQUIRED.
my $str = "Ich muß studieren Perl.";
my $sub = "MÜSS";
my $match;
if (my($pos,$len) = $Collator->index($str, $sub)) {
$match = substr($str, $pos, $len);
}
and get "muß" in $match since "muß"
is primary equal to "MÜSS".
$match_ref = $Collator->match($string, $substring)
($match) = $Collator->match($string, $substring)
If $substring matches a part of $string, in scalar context, returns
a reference to the first occurrence of the matching part
($match_ref is always true if matches,
since every reference is true);
in list context, returns the first occurrence of the matching part.
If $substring does not match any part of $string,
returns undef in scalar context and
an empty list in list context.
e.g.
if ($match_ref = $Collator->match($str, $sub)) { # scalar context
print "matches [$$match_ref].\n";
} else {
print "doesn't match.\n";
}
or
if (($match) = $Collator->match($str, $sub)) { # list context
print "matches [$match].\n";
} else {
print "doesn't match.\n";
}
@match = $Collator->gmatch($string, $substring)
If $substring matches a part of $string, returns
all the matching parts (or matching count in scalar context).
If $substring does not match any part of $string,
returns an empty list.
$count = $Collator->subst($string, $substring, $replacement)
If $substring matches a part of $string,
the first occurrence of the matching part is replaced by $replacement
($string is modified) and return $count (always equals to 1).
$replacement can be a CODEREF,
taking the matching part as an argument,
and returning a string to replace the matching part
(a bit similar to s/(..)/$coderef->($1)/e).
$count = $Collator->gsubst($string, $substring, $replacement)
If $substring matches a part of $string,
all the occurrences of the matching part is replaced by $replacement
($string is modified) and return $count.
$replacement can be a CODEREF,
taking the matching part as an argument,
and returning a string to replace the matching part
(a bit similar to s/(..)/$coderef->($1)/eg).
e.g.
my $Collator = Unicode::Collate->new( normalization => undef, level => 1 );
# (normalization => undef) is REQUIRED.
my $str = "Camel donkey zebra came\x{301}l CAMEL horse cAm\0E\0L...";
$Collator->gsubst($str, "camel", sub { "<b>$_[0]</b>" });
# now $str is "<b>Camel</b> donkey zebra <b>came\x{301}l</b> <b>CAMEL</b> horse <b>cAm\0E\0L</b>...";
# i.e., all the camels are made bold-faced.
%old_tailoring = $Collator->change(%new_tailoring)
Change the value of specified keys and returns the changed part.
$Collator = Unicode::Collate->new(level => 4);
$Collator->eq("perl", "PERL"); # false
%old = $Collator->change(level => 2); # returns (level => 4).
$Collator->eq("perl", "PERL"); # true
$Collator->change(%old); # returns (level => 2).
$Collator->eq("perl", "PERL"); # false
Not all (key,value)s are allowed to be changed.
See also @Unicode::Collate::ChangeOK and @Unicode::Collate::ChangeNG.
In the scalar context, returns the modified collator (but it is not a clone from the original).
$Collator->change(level => 2)->eq("perl", "PERL"); # true
$Collator->eq("perl", "PERL"); # true; now max level is 2nd.
$Collator->change(level => 4)->eq("perl", "PERL"); # false
$version = $Collator->version()
Returns the version number (a string) of the Unicode Standard
which the table file used by the collator object is based on.
If the table does not include a version line (starting with @version),
returns "unknown".
UCA_Version()
Returns the tracking version number of UTS #10 this module consults.
Base_Unicode_Version()
Returns the version number of UTS #10 this module consults.
No method will be exported.
Though this module can be used without any table file,
to use this module easily, it is recommended to install a table file
in the UCA format, by copying it under the directory
<a place in @INC>/Unicode/Collate.
The most preferable one is ``The Default Unicode Collation Element Table'' (aka DUCET), available from the Unicode Consortium's website:
http://www.unicode.org/Public/UCA/
http://www.unicode.org/Public/UCA/latest/allkeys.txt (latest version)
If DUCET is not installed, it is recommended to copy the file from http://www.unicode.org/Public/UCA/latest/allkeys.txt to <a place in @INC>/Unicode/Collate/allkeys.txt manually.
Use of the normalization parameter requires the Unicode::Normalize
module (see the Unicode::Normalize manpage).
If you need not it (say, in the case when you need not
handle any combining characters),
assign normalization => undef explicitly.
-- see 6.5 Avoiding Normalization, UTS #10.
The Conformance Test for the UCA is available under http://www.unicode.org/Public/UCA/.
For CollationTest_SHIFTED.txt,
a collator via Unicode::Collate->new( ) should be used;
for CollationTest_NON_IGNORABLE.txt, a collator via
Unicode::Collate->new(variable => "non-ignorable", level => 3).
Unicode::Normalize is required to try The Conformance Test.
The Unicode::Collate module for perl was written by SADAHIRO Tomoyuki,
<SADAHIRO@cpan.org>. This module is Copyright(C) 2001-2005,
SADAHIRO Tomoyuki. Japan. All rights reserved.
This module is free software; you can redistribute it and/or modify it under the same terms as Perl itself.
The file Unicode/Collate/allkeys.txt was copied directly from http://www.unicode.org/Public/UCA/4.1.0/allkeys.txt. This file is Copyright (c) 1991-2005 Unicode, Inc. All rights reserved. Distributed under the Terms of Use in http://www.unicode.org/copyright.html.
http://www.unicode.org/Public/UNIDATA/HangulSyllableType.txt