|
|
ExtUtils::MakeMaker::FAQ - Frequently Asked Questions About MakeMaker
FAQs, tricks and tips for ExtUtils::MakeMaker.
Recent versions of MakeMaker will only install man pages on Unix like operating systems.
For an individual module:
perl Makefile.PL INSTALLMAN1DIR=none INSTALLMAN3DIR=none
If you want to suppress man page installation for all modules you have to reconfigure Perl and tell it 'none' when it asks where to install man pages.
Two ways. One is to build the module normally...
perl Makefile.PL
make
...and then set the PERL5LIB environment variable to point at the blib/lib and blib/arch directories.
The other is to install the module in a temporary location.
perl Makefile.PL PREFIX=~/tmp LIB=~/tmp/lib/perl
And then set PERL5LIB to ~/tmp/lib/perl. This works well when you have multiple modules to work with. It also ensures that the module goes through its full installation process which may modify it.
Why did MakeMaker reinvent the build configuration wheel? Why not just use autoconf or automake or ppm or Ant or ...
There are many reasons, but the major one is cross-platform compatibility.
Perl is one of the most ported pieces of software ever. It works on operating systems I've never even heard of (see perlport for details). It needs a build tool that can work on all those platforms and with any wacky C compilers and linkers they might have.
No such build tool exists. Even make itself has wildly different dialects. So we have to build our own.
Module::Build is a project by Ken Williams to supplant MakeMaker. Its primary advantages are:
Module::Build is the official heir apparent to MakeMaker and we encourage people to work on M::B rather than spending time adding features to MakeMaker.
Often you want to manually set the $VERSION in the main module distribution because this is the version that everybody sees on CPAN and maybe you want to customize it a bit. But for all the other modules in your dist, $VERSION is really just bookkeeping and all that's important is it goes up every time the module is changed. Doing this by hand is a pain and you often forget.
Simplest way to do it automatically is to use your version control system's revision number (you are using version control, right?).
In CVS, RCS and SVN you use $Revision$ (see the documentation of your version control system for details) writing it like so:
$VERSION = sprintf "%d.%03d", q$Revision$ =~ /(\d+)/g;
Every time the file is checked in the $Revision$ will be updated, updating your $VERSION.
In CVS version 1.9 is followed by 1.10. Since CPAN compares version
numbers numerically we use a sprintf() to convert 1.9 to 1.009 and
1.10 to 1.010 which compare properly.
If branches are involved (ie. $Revision: 1.5.3.4$) its a little more complicated.
# must be all on one line or MakeMaker will get confused.
$VERSION = do { my @r = (q$Revision$ =~ /\d+/g); sprintf "%d."."%03d" x $#r, @r };
META.yml is a module meta-data file pioneered by Module::Build and automatically generated as part of the 'distdir' target (and thus 'dist'). See Module Meta-Data in the ExtUtils::MakeMaker manpage.
To shut off its generation, pass the NO_META flag to WriteMakefile().
XS code is very sensitive to the module version number and will complain if the version number in your Perl module doesn't match. If you change your module's version # without reruning Makefile.PL the old version number will remain in the Makefile causing the XS code to be built with the wrong number.
To avoid this, you can force the Makefile to be rebuilt whenever you
change the module containing the version number by adding this to your
WriteMakefile() arguments.
depend => { '$(FIRST_MAKEFILE)' => '$(VERSION_FROM)' }
Sometimes you need to have two and more XS files in the same package. One way to go is to put them into separate directories, but sometimes this is not the most suitable solution. The following technique allows you to put two (and more) XS files in the same directory.
Let's assume that we have a package Cool::Foo, which includes
Cool::Foo and Cool::Bar modules each having a separate XS
file. First we use the following Makefile.PL:
use ExtUtils::MakeMaker;
WriteMakefile(
NAME => 'Cool::Foo',
VERSION_FROM => 'Foo.pm',
OBJECT => q/$(O_FILES)/,
# ... other attrs ...
);
Notice the OBJECT attribute. MakeMaker generates the following
variables in Makefile:
# Handy lists of source code files:
XS_FILES= Bar.xs \
Foo.xs
C_FILES = Bar.c \
Foo.c
O_FILES = Bar.o \
Foo.o
Therefore we can use the O_FILES variable to tell MakeMaker to use
these objects into the shared library.
That's pretty much it. Now write Foo.pm and Foo.xs, Bar.pm and Bar.xs, where Foo.pm bootstraps the shared library and Bar.pm simply loading Foo.pm.
The only issue left is to how to bootstrap Bar.xs. This is done from Foo.xs:
MODULE = Cool::Foo PACKAGE = Cool::Foo
BOOT: # boot the second XS file boot_Cool__Bar(aTHX_ cv);
If you have more than two files, this is the place where you should boot extra XS files from.
The following four files sum up all the details discussed so far.
Foo.pm: ------- package Cool::Foo;
require DynaLoader;
our @ISA = qw(DynaLoader); our $VERSION = '0.01'; bootstrap Cool::Foo $VERSION;
1;
Bar.pm: ------- package Cool::Bar;
use Cool::Foo; # bootstraps Bar.xs
1;
Foo.xs: ------- #include "EXTERN.h" #include "perl.h" #include "XSUB.h"
MODULE = Cool::Foo PACKAGE = Cool::Foo
BOOT: # boot the second XS file boot_Cool__Bar(aTHX_ cv);
MODULE = Cool::Foo PACKAGE = Cool::Foo PREFIX = cool_foo_
void cool_foo_perl_rules()
CODE:
fprintf(stderr, "Cool::Foo says: Perl Rules\n");
Bar.xs: ------- #include "EXTERN.h" #include "perl.h" #include "XSUB.h"
MODULE = Cool::Bar PACKAGE = Cool::Bar PREFIX = cool_bar_
void cool_bar_perl_rules()
CODE:
fprintf(stderr, "Cool::Bar says: Perl Rules\n");
And of course a very basic test:
test.pl:
--------
use Test;
BEGIN { plan tests => 1 };
use Cool::Foo;
use Cool::Bar;
Cool::Foo::perl_rules();
Cool::Bar::perl_rules();
ok 1;
This tip has been brought to you by Nick Ing-Simmons and Stas Bekman.
If you have a question you'd like to see added to the FAQ (whether or not you have the answer) please send it to makemaker@perl.org.
The denizens of makemaker@perl.org.