DOC HOME SITE MAP MAN PAGES GNU INFO SEARCH
 

get(CP)


get -- get a version of an SCCS file

Syntax

get [-rSID] [-ccutoff] [-ilist] [-xlist] [-wstring] [-aseq-no.] [-k] [-e] [-l[p]] [-p] [-m] [-n] [-s] [-b] [-g] [-t] file...

Description

The get command generates a file by extracting the contents from each named SCCS file according to the specifications given by its arguments. The arguments may be specified in any order, but all arguments apply to all named SCCS files. If a directory is named, get behaves as though each file in the directory were specified as a named file, except that non-SCCS files and unreadable files are silently ignored. If a name of - is given, the standard input is read; each line of the standard input is taken to be the name of an SCCS file to be processed. Again, non-SCCS files and unreadable files are silently ignored.

The generated text is normally written into a file called the g-file whose name is derived from the SCCS file name by removing the leading s..

Each of the arguments is explained below as though only one SCCS file is to be processed, but the effects of any argument applies independently to each named file.


-rSID
The SCCS identification string (SID) of the version (delta) of an SCCS file to be retrieved. Table 1 shows what version of an SCCS file is retrieved as a function of the SID specified. Also the SID of the version to be eventually created by delta(CP) if the -e option is used.

-ccutoff
The cutoff date and time, in the form:

YY[MM[DD[HH[MM[SS]]]]]

Fro the YY component, values in the range 69-99 refer to years in the twentieth century (1969 to 1999 inclusive); values in the range 00-68 refer to years in the twenty-first century (2000 to 2068 inclusive).

No changes (deltas) to the SCCS file which were created after the specified cutoff date-time are included in the extracted file. Units omitted from the date-time default to their maximum possible values; that is, -c7502 is equivalent to -c750228235959. Any number of non-numeric characters may separate the various 2-digit pieces of the cutoff date-time. This feature allows you to specify a cutoff date in the form: "-c77/2/2 9:22:25". Note that this implies that you may use the %E% and %U% identification keywords (see below) for nested gets.

get "-c%E% %U%" s.file


-ilist
A list of deltas to be included (forced to be applied) in the creation of the generated file. The list has the following syntax:

<list> ::= <range> | <list> , <range>
<range> ::= SID | SID - SID

SID, the SCCS Identification of a delta, may be in any form shown in the ``SID Specified'' column of Table 1.


-xlist
A list of deltas to be excluded in the creation of the generated file. See the -i option for the list format.

-e
Indicates that the get is for the purpose of editing or making a change (delta) to the SCCS file via a subsequent use of delta(CP). The -e option used in a get for a particular version (SID) of the SCCS file prevents further gets for editing on the same SID until delta is executed or the j (joint edit) flag is set in the SCCS file (see admin(CP)). Concurrent use of get -e for different SIDs is always allowed.

If the g-file generated by get with an -e option is accidentally ruined in the process of editing it, it may be regenerated by re-executing the get command with the -k option in place of the -e option.

SCCS file protection specified via the ceiling, floor, and authorized user list stored in the SCCS file (see admin(CP)) is enforced when the -e option is used.


-b
Used with the -e option to indicate that the new delta should have an SID in a new branch as shown in Table 1. This option is ignored if the b flag is not present in the file (see admin(CP)) or if the retrieved delta is not a leaf delta. (A leaf delta is one that has no successors on the SCCS file tree.)

Note: A branch delta may always be created from a non-leaf delta. Partial SIDs are interpreted as shown in the ``SID Retrieved'' column of Table 1.


-k
Suppresses replacement of identification keywords (see below) in the retrieved text by their value. The -k option is implied by the -e option.

-l[p]
Causes a delta summary to be written into an l-file. If -lp is used, then an l-file is not created; the delta summary is written on standard output instead.

-p
Causes the text retrieved from the SCCS file to be written on standard output. No g-file is created. All output which normally goes to the standard output goes to file descriptor 2 instead, unless the -s option is used, in which case it disappears.

-s
Suppresses all output normally written on the standard output. However, fatal error messages (which always go to file descriptor 2) remain unaffected.

-m
Causes each text line retrieved from the SCCS file to be preceded by the SID of the delta that inserted the text line in the SCCS file. The format is: SID, followed by a horizontal tab, followed by the text line.

-n
Causes each generated text line to be preceded with the %M% identification keyword value (see below). The format is: %M% value, followed by a horizontal tab, followed by the text line. When both the -m and -n options are used, the format is: %M% value, followed by a horizontal tab, followed by the -m option generated format.

-g
Suppresses the actual retrieval of text from the SCCS file. It is primarily used to generate an l-file, or to verify the existence of a particular SID.

-t
Used to access the most recently created delta in a given release (for example, -r1), or release and level (for example, -r1.2).

-w string
Substitute string for all occurrences of %W% when getting the file.

-aseq-no.
The delta sequence number of the SCCS file delta (version) to be retrieved (see sccsfile(FP)). This option is used by the comb(CP) command; it is not a generally useful option. If both the -r and -a options are specified, only the -a option is used. Care should be taken when using the -a option in conjunction with the -e option, as the SID of the delta to be created may not be what you expect. The -r option can be used with the -a and -e options to control the naming of the SID of the delta to be created.

For each file processed, get responds (on standard output) with the SID being accessed and with the number of lines retrieved from the SCCS file.

If the -e option is used, the SID of the delta to be made appears after the SID accessed and before the number of lines generated. If there is more than one named file or if a directory or standard input is named, each file name is printed (preceded by a new-line) before it is processed. If the -i option is used, included deltas are listed following the notation ``Included''; if the -x option is used, excluded deltas are listed following the notation ``Excluded''.

TABLE 1. Determination of SCCS Identification String
SID* -b Option Other SID SID of Delta
Specified Used+ Conditions Retrieved to be Created
none++ no R defaults to mR mR.mL mR.(mL+1)
none++ yes R defaults to mR mR.mL mR.mL.(mB+1).1
R no R > mR mR.mL R.1***
R no R = mR mR.mL mR.(mL+1)
R yes R > mR mR.mL mR.mL.(mB+1).1
R yes R = mR mR.mL mR.mL.(mB+1).1
R - R < mR and hR.mL** hR.mL.(mB+1).1
    R does not exist    
R - Trunk succ.# R.mL R.mL.(mB+1).1
    in release > R    
    and R exists    
R.L no No trunk succ. R.L R.(L+1)
R.L yes No trunk succ. R.L R.L.(mB+1).1
R.L - Trunk succ. R.L R.L.(mB+1).1
    in release GREATER THAN OR EQUAL TO R    
R.L.B no No branch succ. R.L.B.mS R.L.B.(mS+1)
R.L.B yes No branch succ. R.L.B.mS R.L.(mB+1).1
R.L.B.S no No branch succ. R.L.B.S R.L.B.(S+1)
R.L.B.S yes No branch succ. R.L.B.S R.L.(mB+1).1
R.L.B.S - Branch succ. R.L.B.S R.L.(mB+1).1

   +----------------------------------------------------------------------+
   |        TABLE 1. Determination of SCCS Identification String          |
   +----------+-----------+------------------+-----------+----------------+
   |  SID*    | -b Option |      Other       |    SID    |  SID of Delta  |
   +----------+-----------+------------------+-----------+----------------+
   |Specified |   Used    |    Conditions    | Retrieved | to be Created  |
   +----------+-----------+------------------+-----------+----------------+
   |none      |    no     | R defaults to mR | mR.mL     | mR.(mL+1)      |
   +----------+-----------+------------------+-----------+----------------+
   |none      |    yes    | R defaults to mR | mR.mL     | mR.mL.(mB+1).1 |
   +----------+-----------+------------------+-----------+----------------+
   |R         |    no     | R > mR           | mR.mL     | R.1***         |
   +----------+-----------+------------------+-----------+----------------+
   |R         |    no     | R = mR           | mR.mL     | mR.(mL+1)      |
   +----------+-----------+------------------+-----------+----------------+
   |R         |    yes    | R > mR           | mR.mL     | mR.mL.(mB+1).1 |
   +----------+-----------+------------------+-----------+----------------+
   |R         |    yes    | R = mR           | mR.mL     | mR.mL.(mB+1).1 |
   +----------+-----------+------------------+-----------+----------------+
   |R         |     -     | R < mR and       | hR.mL**   | hR.mL.(mB+1).1 |
   +----------+-----------+------------------+-----------+----------------+
   |          |           | R does not exist |           |                |
   +----------+-----------+------------------+-----------+----------------+
   |R         |     -     | Trunk succ.#     | R.mL      | R.mL.(mB+1).1  |
   +----------+-----------+------------------+-----------+----------------+
   |          |           | in release > R   |           |                |
   +----------+-----------+------------------+-----------+----------------+
   |          |           | and R exists     |           |                |
   +----------+-----------+------------------+-----------+----------------+
   |R.L       |    no     | No trunk succ.   | R.L       | R.(L+1)        |
   +----------+-----------+------------------+-----------+----------------+
   |R.L       |    yes    | No trunk succ.   | R.L       | R.L.(mB+1).1   |
   +----------+-----------+------------------+-----------+----------------+
   |R.L       |     -     | Trunk succ.      | R.L       | R.L.(mB+1).1   |
   +----------+-----------+------------------+-----------+----------------+
   |          |           | in release  R    |           |                |
   +----------+-----------+------------------+-----------+----------------+
   |R.L.B     |    no     | No branch succ.  | R.L.B.mS  | R.L.B.(mS+1)   |
   +----------+-----------+------------------+-----------+----------------+
   |R.L.B     |    yes    | No branch succ.  | R.L.B.mS  | R.L.(mB+1).1   |
   +----------+-----------+------------------+-----------+----------------+
   |R.L.B.S   |    no     | No branch succ.  | R.L.B.S   | R.L.B.(S+1)    |
   +----------+-----------+------------------+-----------+----------------+
   |R.L.B.S   |    yes    | No branch succ.  | R.L.B.S   | R.L.(mB+1).1   |
   +----------+-----------+------------------+-----------+----------------+
   |R.L.B.S   |     -     | Branch succ.     | R.L.B.S   | R.L.(mB+1).1   |
   +----------+-----------+------------------+-----------+----------------+


*
``R'', ``L'', ``B'', and ``S'' are the ``release'', ``level'', ``branch'', and ``sequence'' components of the SID, respectively; ``m'' means ``maximum''. Thus, for example, ``R.mL'' means ``the maximum level number within release R''; ``R.L.(mB+1).1'' means ``the first sequence number on the new branch (for example, maximum branch number plus one) of level L within release R''. Note that if the SID specified is of the form ``R.L'', ``R.L.B'', or ``R.L.B.S'', each of the specified components must exist.

**
``hR'' is the highest existing release that is lower than the specified, nonexistent, release R.

***
This is used to force creation of the first delta in a new release.

#
Successor.

+
The -b option is effective only if the b flag (see admin(CP)) is present in the file. An entry of - means ``irrelevant''.

++
This case applies if the d (default SID) flag is not present in the file. If the d flag is present in the file, then the SID obtained from the d flag is interpreted as if it had been specified on the command line. Thus, one of the other cases in this table applies.

Identification keywords

Identifying information is inserted into the text retrieved from the SCCS file by replacing identification keywords with their value wherever they occur. The following keywords may be used in the text stored in an SCCS file:

Keyword
Value


%M%
Module name: either the value of the m flag in the file (see admin(CP)), or if absent, the name of the SCCS file with the leading s. removed.

%I%
SCCS identification (SID) (%R%.%L%.%B%.%S%) of the retrieved text.

%R%
Release.

%L%
Level.

%B%
Branch.

%S%
Sequence.

%D%
Current date (YY/MM/DD).

%H%
Current date (MM/DD/YY).

%T%
Current time (HH:MM:SS).

%E%
Date newest applied delta was created (YY/MM/DD).

%G%
Date newest applied delta was created (MM/DD/YY).

%U%
Time newest applied delta was created (HH:MM:SS).

%Y%
Module type: value of the t flag in the SCCS file (see admin(CP)).

%F%
SCCS file name.

%P%
Fully qualified SCCS file name.

%Q%
The value of the q flag in the file (see admin(CP)).

%C%
Current line number. This keyword is intended for identifying messages output by the program such as ``this should not have happened'' type errors. It is not intended to be used on every line to provide sequence numbers.

%Z%
The 4-character string @(#) recognizable by what(CP).

%W%
A shorthand notation for constructing what(CP) strings for system program files. %W% = %Z%%M%<horizontal-tab>%I%

%A%
Another shorthand notation for constructing what(CP) strings for non-UNIX-type system program files.
%A% = %Z%%Y% %M% %I%%Z%

Several auxiliary files may be created by get. These files are known generically as the g-file, l-file, p-file, and z-file. The letter before the hyphen is called the tag. An auxiliary file name is formed from the SCCS file name: the last component of all SCCS file names must be of the form s.module-name; the auxiliary files are named by replacing the leading s with the tag. The g-file is an exception to this scheme: the g-file is named by removing the s. prefix. For example, s.xyz.c, the auxiliary file names would be xyz.c, l.xyz.c, p.xyz.c, and z.xyz.c, respectively.

The g-file, which contains the generated text, is created in the current directory (unless the -p option is used). A g-file is created in all cases, whether or not any lines of text were generated by the get. It is owned by the real user. If the -k option is used or implied, its mode is 644; otherwise its mode is 444. Only the real user needs write permission in the current directory.

The l-file contains a table showing which deltas were applied in generating the retrieved text. The l-file is created in the current directory if the -l option is used; its mode is 444 and it is owned by the real user. Only the real user needs write permission in the current directory.

Lines in the l-file have the following format:


a.
A blank character if the delta was applied; * otherwise.

b.
A blank character if the delta was applied or was not applied and ignored; * if the delta was not applied and was not ignored.

c.
A code indicating a ``special'' reason why the delta was or was not applied:

``I'': Included.

``X'': Excluded.

``C'': Cut off (by a -c option).

d.
Blank.

e.
SCCS identification (SID).

f.
Tab character.

g.
Date and time (in the form YY/MM/DD HH:MM:SS) of creation.

h.
Blank.

i.
Login name of person who created delta.

The comments and MR data follow on subsequent lines, indented one horizontal tab character. A blank line terminates each entry.

The p-file is used to pass information resulting from a get with a -e option along to delta. Its contents are also used to prevent a subsequent execution of get with a -e option for the same SID until delta is executed or the joint edit flag, j, (see admin(CP)) is set in the SCCS file. The p-file is created in the directory containing the SCCS file and the effective user must have write permission in that directory. Its mode is 644 and it is owned by the effective user. The format of the p-file is: the gotten SID, followed by a blank, followed by the SID that the new delta will have when it is made, followed by a blank, followed by the login name of the real user, followed by a blank, followed by the date-time the get was executed, followed by a blank and the -i option argument if it was present, followed by a blank and the -x option argument if it was present, followed by a new-line. There can be an arbitrary number of lines in the p-file at any time; no two lines can have the same new delta SID.

The z-file serves as a lock-out mechanism against simultaneous updates. Its contents are the binary (2 bytes) process ID of the command (for example, get) that created it. The z-file is created in the directory containing the SCCS file for the duration of get. The same protection restrictions as those for the p-file apply for the z-file. The z-file is created with mode 444.

Files


g-file
Existed before the execution of delta; removed after completion of delta.

p-file
Existed before the execution of delta; may exist after completion of delta.

q-file
Created during the execution of delta; removed after completion of delta.

x-file
Created during the execution of delta; renamed to SCCS file after completion of delta.

z-file
Created during the execution of delta; removed during the execution of delta.

d-file
Created during the execution of delta; removed after completion of delta.

/usr/bin/bdiff
Program to compute differences between the ``gotten'' file and the g-file.

Notes

If the effective user has write permission (either explicitly or implicitly) in the directory containing the SCCS files, but the real user does not, then only one file may be named when the -e option is used.

See also

admin(CP), delta(CP), prs(CP), what(CP)

Standards conformance

get is conformant with:

X/Open Portability Guide, Issue 3, 1989 .


© 2003 Caldera International, Inc. All rights reserved.
SCO OpenServer Release 5.0.7 -- 11 February 2003