Configuring protocols

Configure protocols for network adapters using the Network Configuration Manager:

• To add a protocol:

  Select the adapter that will use the protocol from the displayed list, then from the Protocol menu, select Add New.

• To modify protocol configuration:

  Select the protocol to modify from the displayed list, then from the Protocol menu, select Modify. Enter new configuration parameters as you did when adding protocols.

• To view protocol configuration:

  Select the protocol to view from the displayed list, then from the Protocol menu, select Examine.
  

• To remove a protocol configuration:

  Select the protocol to remove from the displayed list, then from the Protocol menu, select Remove. You will be prompted to confirm your choice and informed when the operation is complete.

  ---

  NOTE: If your network interface consists of only one adapter and one protocol, deconfiguring the protocol will also remove the adapter.

  ---

Additional information about protocol configuration is provided in the SCO OpenServer documentation set:

TCP/IP configuration parameters

See ``Administering TCP/IP''.

NFS^®

See ``Configuring the Network File System (NFS)''.

IPX/SPX configuration parameters

See ``Administering SCO IPX/SPX''.

SCO Gateway for NetWare^®

See ``Administering SCO Gateway for NetWare''.

NetBIOS configuration parameters

See ``Configuring and using NetBIOS''.

LAN Manager Client configuration parameters

See ``Administering and using LAN Manager Client''.

SCO Advanced File and Print Server services

The Network Configuration Manager enables you to configure SCO Advanced File and Print Server networking transport protocols and applications. See your SCO Advanced File and Print Server documentation for more information.

Other network protocols

The Network Configuration Manager enables you to configure other SCO OpenServer-compatible networking transport protocols and applications; see your vendor's documentation for more information.