Configuring the Serial Line Internet Protocol (SLIP)

Removing the SLIP stack

To remove the SLIP stack and its associated links:

Run the Network Configuration Manager as root.
Select SCO TCP/IP SLIP driver from the list.
Select Remove network device from the Hardware menu.
Select Yes when prompted to remove the link. You see several messages as the SLIP drivers are removed from the kernel.
Select Exit from the Add hardware menu.
Select Yes when prompted to relink the kernel, and enter y at the two prompts that appear shortly thereafter.
Shut the system down and reboot it by using the System Shutdown Manager as described in the SCO OpenServer Handbook. Remember to select Reboot after shutdown when using the manager.