|
|
Problems found during the
boot(HW)
phase of the installation might
require certain SCSI drivers to be disabled. To disable a driver
at boot time, add disable=driver_name
to the bootstring.
For example, the following command
at the boot prompt restarts the installation and
disables the alad SCSI host adapter driver:
restart disable=alad
Disable the driver that corresponds to the init( ) function shown in the following table; init()functions are displayed in the boot hardware listing:
| driver | init() | device |
|---|---|---|
| name | function | name |
| ad | ahainit | Adaptec 154x, 164x, 174x (Standard mode) |
| ad160 | ad160init | Adaptec 2916x, 3916x (7892, 7899 Chips) |
| alad | aladinit |
Adaptec 294x, 394x, 494x (785X, 7860, 7870, 7880,
7895 Chips) and SlimSCSI 1480A/B Adapters |
| ams | amsinit | Advanced Micro Devices PCscsi |
| arad | aradinit | Adaptec 274x, 284x (7770 Chip) |
| blad | bladinit |
Adaptec 2940U2W, 2950U2B, 3950U2 (7890, 7891,
7897 Ultra2 Chips) |
| blc | blcinit | BusLogic MultiMaster Adapters |
| cha | chainit | Compaq Fast-SCSI-2 Adapter |
| ciha (*) | cihainit | Corollary 386/486 CBUS SCSI-CPU |
| ciss | cissinit | Compaq Intelligent Storage Subsystem |
| clad | cladinit | Compaq Array Controller |
| dptr | dptrinit | DPT SCSI & RAID Adapters |
| efp (*) | ehainit | Olivetti ESC-1, ESC-2, and EFP Adapters |
| eiad | eiadinit | Adaptec 174x (Enhanced mode) |
| fdhb | fdi_init | Adaptec 292x, Future Domain 16x0, 600, 700 (18x0 Chip) |
| flashpt | fptinit | BusLogic FlashPoint Adapters |
| hf | hfinit | IBM HardFile Adapters |
| ida | idainit | Compaq RAID 234234 Adapter |
| iiop (*) | iiopinit | Tricord Intelligent I/O Processor |
| iir | iirinit |
Intel SRCMR, SRCU-31, SRCU-31L,
SRCU-32 Server
RAID Adapters |
| mdac | mdacinit | Mylex Disk Array Controller |
| ncr (*) | ncrinit | NCR Microchannel Systems Host Adapters |
| piiop (*) | piiopinit | Tricord Intelligent I/O Processor |
| slha | slhainit | LSI Logic/Symbios Logic/NCR MPD 53c8xx Host Adapters |
| smad | smadinit |
Adaptec 151x, 152x (6260, 6360 Chips) and
SlimSCSI 1460 Adapters |
| sumo | sumoinit | Storage Plus SCSI-AT (SUMO) |
| tmcha (*) | tmc_init | Future Domain 845, 850, 860, 885 (950 Chip) |
| wd | wdinit | Enhanced IDE, ATAPI Interface |
| wdex (*) | wdexinit | Future Domain (formerly Western Digital) 7000EX |
| wdha (*) | wdhainit | Future Domain (formerly Western Digital) 7000 |
| * | |
|---|---|
| These drivers are no longer supported by SCO, however they are still provided with SCO OpenServer for your convenience. Contact your hardware vendor for support. | |